Paver Sealing – How to Maximize the Benefits

To maximize the benefits of your new paver sealing, make sure you first clean and disinfect the pavers. The sealing process will trap any debris that has accumulated over time and will reveal itself as visible imperfections. Sealing is not meant to cover up imperfections, but rather to enhance them. Clean your pavers thoroughly prior to sealing to prevent the trapping of debris. If you follow these steps, your pavers should look beautiful for years. You can find many DIY paver sealing projects online that can be done at home or by professionals. Learn more about them at paver sealing near me

Penetrating sealers are non-film-forming, which means they do not leave a film-like layer on your pavers. This sealer creates a water-shedding surface with improved surface tension. It will not enhance gloss, but it will provide excellent protection against staining, fading, and weathering. Professionally applied, penetrating sealers are environmentally-friendly and long-lasting. Unlike traditional sealers, these materials will never turn yellow and are resistant to UV and heat.

A good sealant will repel oil stains and discourage weeds and algae from growing on your pavers. Paver sealing will also prevent fading over time, which will make cleaning easier. Another benefit of paver sealing is color enhancement. Many types of sealants are marketed for this purpose. Some are called “wet look” or “enhanced look.” While most paver sealers will not change the color of your pavers, they will darken the color, which will make them appear more vibrant and attractive.

Water-based paver sealants require a simple application process. A pump-up sprayer or low-pressure electric sprayer with an adjustable nozzle is both suitable. Ensure that you thoroughly clean your pavers before applying the sealant. To avoid overspray or excessive fumes, make sure you are in a well-ventilated space. Once the sealant is applied, the paver surface should be dry for at least 24 hours.

When using a solvent-based sealer, you should be sure to wait at least three days after the sealing job to allow the pavers to fully cure. The temperature should be at least 40 degrees fahrenheit. If it is too hot or too cold, the sealer will not cure properly. If you don’t allow enough time to complete the sealing process, your pavers may become cloudy. If you have the time, you should consider using an IR thermometer to check the temperature before sealing.

The sealer will create an invisible layer on top of your pavers that will repel water, oil, and other substances. While you can’t see the layer, it will still repel water and prevent the growth of weeds and other pests. If you notice any spots, it’s best to remove it immediately. You don’t want to risk the appearance of a flooded or dirty patio. You should also consider sealing the concrete before you install it.

While it may seem like it’s a tedious process, it’s not difficult once you understand the process. In warm climates, pavers can be sealed in a matter of hours. In cooler climates, you should wait about 24 hours before applying the sealant. If you are in a shady area, pavers will need a day or two to dry completely. Once you’ve done this, they’ll be protected for years to come.

Contact Info

AAA Paver Sealing
159 Palmyra Dr
Orlando, Florida, 32807
(407) 392-0888